Hydrogen sorption properties of V85Ni15

An alloy with nominal composition V₈₅Ni₁₅ was prepared in a vacuum induction melting apparatus. The chemical analysis of the sample showed a V (Ni) content of 82.63 (15.68) at% and small contaminations by carbon and aluminum. XRD measurements confirmed that the bcc Ni-V solid solution phase is the main constituent of the sample. However, a minor impurity (approximately 6.5 wt%) due to the precipitation of the sigma NiV_3-x phase is present in the sample.Hydrogen sorption measurements extending from 150 °C up to 400 °C in a wide pressure range (up to 90 bar) were performed. Upon hydrogenation below 250 °C, one observes the subsequent presence of an α phase and of two hydride phases with different values of dehydrogenation enthalpy: ΔH_dehydr = 21 ± 1 kJ/mol for 0.15 ≤ H/M ≤ 0.30 and ΔH_dehydr = 26 ± 2 kJ/mol for 0.53 ≤ H/M ≤ 0.59. Above 300 °C, there is no evidence of the formation of hydrides and only an α phase is present up to the maximum measured composition, with a hydrogenation enthalpy ΔH_hydr = 10.0 ± 0.5 kJ/mol.     

非高斯噪声激励下非线性漂移Fokker-Planck方程的非稳态解及其应用

非高斯噪声广泛存在于各种非线性系统，对非高斯噪声所驱动系统的非稳态演化行为进行研究可以更为深入的了解其内在的演化机理．本文对非高斯噪声和高斯白噪声共同驱动的非线性动力学系统的非稳态演化问题进行研究．首先应用格林函数的 $\Omega$ 展开理论在初始区域对非线性动力学系统进行线性化，然后结合本征值和本征矢理论推导出了该系统 Fokker-Planck 方程的近似非稳态解的表达式，最后以 Logistic 系统模型为例分析了非高斯噪声强度，关联时间及非高斯噪声偏离参数对非稳态解以及一阶矩的影响．研究结果表明，用 Logistic 模型描述产品产量增长时，其非稳态解可更好地反映产品产量在不稳定点附近的演化行为．     

The vibration and pull-in mechanism of two coupled elastically restrained beams assembly subjected to electrostatic force

ABSTRACT

The novel model of the coupled beam-type electrodes with elastic roots, subjected to the AC and DC voltages is constructed. The exact critical pull-in voltage of the two coupled elastically restrained beams with size effect is presented. The analytical method of the general system subjected to the AC and DC voltages simultaneously is presented. The characteristic mechanism of coupled vibration is investigated.     

A fast branch,bound and remember algorithm for disassembly line balancing problem

In recent years, the interests of disassembly line have increased owing to economic reasons and the increase of environmental awareness. Effective line can provide many advantages in terms of economic aspect and it facilitates competition the companies with others. This study contributes to the relevant literature by a branch, bound and remember algorithm for disassembly line balancing problem with AND/OR precedence. The proposed exact solution method employs the memory-based dominance rule to eliminate the reduplicated sub-problems by storing all the searched sub-problems and to utilise cyclic best-first search strategy to obtain high-quality complete solutions fast. In this paper, minimising the number of stations is taken as the performance measure. The proposed methodology is tested on a set of 260 instances and compared with the mathematical model using CPLEX solver and five well-known metaheuristics. Computational results show that the proposed method is capable of obtaining the optimal solutions for all the tested instances with less than 0.1?seconds on average. Additionally, comparative study demonstrates that the proposed method is the state-of-the-art algorithm and outperforms the CPLEX solver and metaheuristics in terms of both solution quality and search speed aspects.     

复杂系统的设计认知和创新

目的研究复杂系统设计过程中设计师的设计认知和设计创新行为。方法通过国内外相关文献的研究和分析,总结归纳复杂系统设计问题界定和解决方案构思的认知过程、复杂系统创新设计构思的生成机制、复杂系统的创新设计策略,分析复杂系统设计认知和创新研究领域将发生的变革和未来发展的趋势。结论系统探讨了复杂系统设计认知与创新过程中的设计问题界定和解决方案构思的联合演化机制、给定和自发性解决方案示例,给设计师带来的认知固化和类比推理创新启发作用、结构化和机会主义的创新设计策略,发现当下的复杂系统创新设计理论和实践研究,还需要进一步开展跨学科知识融合激励的复杂系统创新设计研究,与此同时,加强关于设计师主观认知不确定性的定量建模研究,从而更好、更有针对性地探究复杂系统创新设计中认知过程的自然本质。     

A novel approach for bulk micromachining of 4H-SiC by tool-based electrolytic plasma etching in HF-free aqueous solution

Bulk micromachining of single-crystal SiC has been challenging due to its extreme stability both mechanically and chemically. To address this issue, a novel tool-based electrolytic plasma etching method is proposed, with which micropatterns and micro-holes are fabricated in SiC in a hydrofluoric acid-free aqueous solution with no need for masks. The material removal is the result of the combined effects of electrolytic plasma chemistry and physics. The chemistry refers to the reaction of Si with hydroxyl radical to form various SiO_x and with H to form silanes, and the reactions of C to form volatile carbon oxides or hydrocarbons, all of which are accomplished and enhanced under the electrolytic plasma atmosphere. Besides, the local high temperature of plasma thermally promotes the evaporation or dissolution of SiO₂ in NaOH solution. The tool-based electrolytic plasma etching method provides alternative approaches for the fabrication of SiC-based MEMS and devices.     

Gd-Bi-M-Ce-O (M = Cu,Zr, Ni,Co, Mn) ceria-based solid solutions for low temperature CO oxidation

Ceria based solid solutions doped by Gd, Bi, and the third dopant were synthesized by the co-precipitation method with ultrasonic treatment, followed by calcination at the temperature of 500°С. Characterization of the synthesized nanosystems by XRD, TEM, TG, Raman spectroscopy, FTIR, XPS was carried out. It is shown that all obtained powders of solid solutions crystallized into a cubic structure of the fluorite type, with an average particle size of 5–15 nm. The samples had a mesoporous structure of the pore diameter of 2–5 nm. The catalytic activity of Gd-Bi-M-Ce-O (M = Cu, Zr, Ni, Co, Mn) solid solutions was carried out. The catalyst Gd_0.05Bi_0.15Mn_0.20Ce_0.60O₂ has the lowest oxidation temperature.